Description As a system to connect the sensor in 1.0m unit to measure inner section displacement of the tunnel convergence, it calculates accurate values using a sensor for each displacement and lengthin high resolution. ▣ Application ① Measurement of inner section displacement of convergence after completion of the tunnel structureRead More →
Description During tunnel construction, this sensor measures the displacement of the tunnel face ahead of the excavation at intervals of 1.0 to 3.0 meters.By using high-resolution sensors, it provides highly accurate measurement results. ▣ Application Composition & Characteristics ▣ Product Composition ① Advance displacement sensor② Connecting rod③ Cable & accessoriesRead More →
Description The wireless and wired automatic measurement system SJ-1000 is a system capable of connecting both digital sensors (VW sensors with frequency output) and analog sensors (mV, mA sensors). It can collect, store, and control data efficiently. ▣ Applications Composition & Characteristics ▣ Composition ▣ Features Specification Model Name CR-1000Read More →
Description As a sensor to measure the horizontal displacement of natural ground and structures by each depths (1.0 ~ 3.0 m) during excavation of the ground and construction progress. It calculates accurate values using a high-resolution sensor. ▣ Applications Composition & Characteristics ▣ Components ▣ Features Specification Thông số SJ-9000Read More →
Description The tunnel lining concrete is a structure connected to each span, and deformation occurs depending on the surrounding conditions. In particular, the joint part for application is where the deformation is caused and the displacement occurs in each direction (radius, tangential and axial direction). ▣ Applications Composition & CharacteristicsRead More →
Description The Electric Joint Meter is used to measure the size change of the surface, connection parts, and cracks in concrete structures. A high-precision and linear potentiometer is mounted inside the housing, allowing the rod to push or pull the sensor when deformation occurs. The movement is then transmitted toRead More →
Description The Electric Crack Meter is used to measure the size change of the surface or connection part, as well as cracks in concrete structures. A high-precision and linear potentiometer is mounted inside the housing. When deformation occurs, the rod pushes or pulls the sensor, which sends the movement toRead More →
Description The Digital Settlement Meter is designed to measure the set point and the settlement of the target ground or structure by means of the head difference (pressure change), and it calculates accurate values at high resolution. ▣ Applications ① Measurement of settlement of flimsy ground and embankment ② MeasurementRead More →
Description It calculates accurate values using a high-resolution electric sensor that directly measures the settlement amount when installed on natural ground or structures during excavation and ground construction. Composition & Characteristic ▣ Components ① Digital extensometer sensor ② Cable ③ Protection box ▣ Features ① High stability and reliability ②Read More →
Description It measures the magnitude of acceleration, its changes, and the resulting velocity at a specific point on a structure to analyze structural stability and dynamic effects. For long-term stable data acquisition, the housing and signal cable are fully watertight and moisture-proof, enabling use in harsh civil engineering environments whileRead More →